Esse-ti 4G.next Voice, Руководство пользователя

Страница: 15 / 52

Page 15
PROGRAMMING
Programming can be carried out locally via a multi-frequency telephone
or remotely via SMS.
P
ROGRAMMING BY TELEPHONE

Connect a standard telephone to the gateway via the RJ-11
connector (G
in the picture at page 8) or using the TEL terminals (I
in the picture at page 8).

Lift the handset and dial the desired programming code (see table
“Programming by telephone”).
Note: at the end of each programming carried out correctly,
you will hear a confirmation tone, while an error tone
will be heard in case of error. In any case, the
dialling tone will follow, after which you can proceed
with the programming or make a call.
Note: during programming, the inter-digit dialling time must
not exceed 5 seconds (see the programming “Inter-
digit dialling time”). Once 5 seconds has elapsed
without digits you will hear the dissuasion tone and
you will have to wait the dialling tone or to hang up.
Note: programming can be carried out even if the signal is
absent. After the confirmation or the error tones, the
dissuasion tone will follow, after which you can
proceed with programming or hang up.
Note: in the table “Programming by telephone” factory
default values are highlighted in bold .