Using Flashes
The TriggerBox is capable of triggering a flash/strobe unit as well as your cameras. Any flash that can
be connected directly to a camera is safe to be connected to the TriggerBox.
Note
: If you are unsure if your flash is compatible with the TriggerBox contact us. Some older
flashes & strobes trigger at significantly higher voltages than the TriggerBox is designed to operate
with.
Connecting your flash to the TriggerBox
Setting up your flashes with the TriggerBox is straight forward and doesn't take much time at all.
1.
Connect your cable from your flash to a TriggerBox output (
fig. 7.a
) This is typically a 3.5mm -
3.5mm jack cable connecting from the sync connection of the flash unit to a TriggerBox output. In this
guide, we will use output 6.
Figure 7.
TriggerBox rear outputs panel 1-6
2.
Once you have hooked up your flash unit, you can plug all your cameras into the TriggerBox and
connect the TriggerBox to your PC via a USB cable.
3.
Launch the TriggerBoxController software and press connect on the software.
23
Содержание TriggerBox
Страница 1: ......