f111000
Set the current focus to enable array.
s000111
Set the current shutter to enable array.
V
Print "FocusArray:[EN EN EN DIS DIS DIS ]".
G
Print "ShutterArray:[DIS DIS DIS EN EN EN ]".
*calling_ESPER_triggerBox
Puts box into "find me mode" - it will print TriggerBox:[box_id]
every 100mS until a '^' char is sent. This is used by the
TriggerBoxController GUI to enumerate boxes on startup.
E
Prints freeMemory():[815 ] - the number of bytes of free memory in
box's RAM.
O
Writes the box's current settings to EEPROM, so that settings will be
recalled the next time the box is powered up.
R
Box will read the settings from its EEPROM into RAM. This also
happens on box startup.
nExample Name
Set the box's internal name.
N
Print "BoxName:[Example Name].
l1
/
l0
Turn front mode light on or off.
L
Print "Light:[EN/DIS]".
m0
/
m2
Set mode to simple mode or sequencer mode.
M
Print Mode:[ 0 ].
z123
Set input delay to 123 millis.
x897
Set link delay to 897 millis.
Z
Print "InDelayMils:[0 ]".
X
Print "LinkDelayMils:[0 ]".
i34
Set box id to 34. This is used by the TriggerBoxController GUI to
enumerate boxes on startup.
I
Print "BoxID:[34].
k1
/
k0
Enable or disable the link output.
K
Print "chainEnable:[EN/DIS]".
q
Resets each value of EEPROM back to default - prints each index it
resets, to indicate progress. Complete at 1023, takes around ten
seconds.
Q
Print each value of each EEPROM address.
21
Содержание TriggerBox
Страница 1: ......