ESPEC SCP-220 Скачать руководство пользователя

Страница: 9 / 80

PLATINOUS SERIES CONTROLLER MANUAL

4. Flashes during communications between the chamber and the PMS-CA(CG) protocol

converter. Also, pressing this box displays the E-BUS setup screen, unless a password has
been registered with the instrumentation.

5. Displays the date and time. Also, pressing this box displays the Date and Screen Saver

Screen, unless a password has been registered with the instrumentation.

Middle Display Area

This is the main display area. The name of the screen is given in the upper left hand corner.

Bottom Display Area

This area displays screen access buttons and a simple guide to working the current screen.

1.4. Touch Screen Operation

This section explains basic elements displayed on the touch screen. Other screen elements are
explained in greater detail in the subsequent chapters.

Processing Buttons

PREV. SCREEN Button

Stops processing in course and returns the display to the previous
screen. If pressed before data changes are entered, a message
confirming whether to suspend the operation or not is displayed.

YES Button

Executes the displayed operation. Read carefully the message
displayed on the screen before pressing this button.

NO Button

Cancels the current operation. Processing is suspended and the
display returns to the previous screen.

SAVE Button

Saves data updates. A message confirming whether to execute the
operation or not is displayed on the screen.

MAIN MENU Button

Returns the display to the main menu.

Selector Boxes

ITEM BOX

Selects the item given in the box. When selected, the box is
highlighted.

Pressing the box selects and deselects the given item.
When selected, the dot is yellow.

Field Boxes

FIELD BOX

When pressed, a keypad is laid over the screen to enable text or
numerical input.
* Other screen elements are inactive while the keypad is displayed.

Содержание SCP-220

















































































Результаты поиска

Содержание SCP-220

Отзывы:

Похожие инструкции для SCP-220

Бренды по названию

Популярные бренды

ESPEC SCP-220, Инструкция по эксплуатации

Результаты поиска

Содержание SCP-220

Отзывы:

Похожие инструкции для SCP-220

Бренды по названию

Популярные бренды