ESP Safety UPES-50D, Руководство по эксплуатации, Страница: 35 / 51

35
Search for Sensors by Searching All Types and Addresses (Automatic Search)
If the user does not know, which sensors are connected to the channel board, the user can choose
to search across all types and MODBUS address. To do this, select ("Channel x Search") menu
(see figure T8) and press the ("Prog") button and go to the Search program start menu (fig T13).
Figure T13
The search program is started in the same way. When the search is complete, the display will
display the number of sensors found and the channel board will switch to the state and measured
parameters control mode for the sensor.
If the number and types of sensors found are satisfactory for the user, exit the menu by pressing
the ("Control/Exit") button. UPES will switch to standby mode.