16
10
Adjust the heights of the base unit feet so that
the platter is level.
In order to confirm the level placement of the turntable, we rec-
ommend using, for example, a commercially-available turntable
leveling device.
Increase base unit
height
Decrease base unit
height
Turn this part
ATTENTION
o
Press down on the four corners of the base unit to confirm
that the weight is distributed evenly on the four feet. If one of
the feet is wobbly, adjust its height.
o
To avoid lowering the feet too much, adjust the height within
a range that allows the included height confirmation gauge
to fit all four sides of the base unit. This will enable the motor
unit to be placed under the base unit in a later step.
Height confirmation
gauge
11
Confirm that the protective covers are attached
to the base unit at the locations shown by the
arrows.
Reattach them if they were removed during installation.
12
Place the spacer block on the base unit so that it
touches the platter as shown in the illustration.
o
Attach the spacer block with the proper up-down orientation.
13
Place the installation rails between the base
unit feet.
o
The installation rail that has 2 screw holes is for the right side.
2
screw holes
Installation (continued)
Содержание Grandioso T1
