KK-EPA.004 Rev No:0 28.09.18
34
You can also select one of the fixed font options, such as various units or label numbers.
8. OPERATION MODE FUNCTIONS
Your EPA 200 process controller operates in two different modes.
Your device operates in the programming mode when the settings are changed in the operation mode and
the parameters are changed in the startup screen where the reading value is displayed on the sensor. This
section describes the functions in operation
mode.
8.1. Tare (Reset ) Fonction
***
Operates only when the Tare function is active. Please refer to the description of the functions or to
activate.
7.1.2 Reset (Tare).
Each time the device is in operating mode, pressing the UP button will activate Tare according to the type
of tare function selected and the Tare status led will light.
8.2. Viewing Maximum and Minimum Values which are read
When you press the DOWN button while the device is in operation mode, you can see the minimum
(minimum) value read from the moment the device starts. When you press the DOWN button again, you
can see the highest (maximum) value read from the moment the device starts.
Not:
You can use the ESC key to erase the (minimum) and (maximum) values in the memory.
Label
preset
You can have the Preset value (PRSET) set for the Tare function to be shown
in Line 2.
-1.34
-LO-
65.65
-HI-
51.42
TEMP
