KK-EPA.004 Rev No:0 28.09.18
17
Analogue Output Types:
6.5.2. Analogue Output ON/OFF
6.5.3. Inverse Setting
0-10V
4-20mA
0-5V
0.5-4.5V
0-20mA
“ON” is used to turn on the analogue output and “OFF” is used to turn it off.
You can choose in which direction the value to be read on the analogue output increases or decreases
according to the sensor. This option, which is OFF according to the factory default settings, provides an
analogue output that increases or decreases in proportion to the value which is read at the sensor. If you
turn this ON, while the value which is read out at the sensor is increasing, the value at the analogue
output will decrease, ie an inversely proportional output will be provided.
OUT
on
off
When you press and
hold to the PRG key ,
the value in the
second line starts
blinking. Enter the
desired value using
the UP and DOWN
buttons.
Press and hold the PRG button.
anlog
cond
off
The new output condition you confirmed
with the PRG button has been set. You can
return to run mode with the ESC button.
cond
on
OUT
off
ON
When you press and
hold to the PRG key
the value in the
second line starts
blinking. You can
turn ON or OFF
using the DOWN
and UP buttons.
Press and hold the PRG button.
anlog
Invrs
oN
The new inverse condition you confirmed
with the PRG button has been set. You can
return to run mode with the ESC button.
Invrs
off
