- 2 -
Installation and repair should be done by a qualified service person.
The appliance should be inspected before use and at least annually
by a qualified service person. More frequent cleaning may be
required due to excessive lint from carpeting, bedding material, etc.
It is imperative that control compartments, burners and circulating air
passageways of the appliance be kept clean.
Specifications
Model
S21 Mini 3
S21 Mini 5
S21 Mini 8
Heat Input
3000 Kcal/h (
3.49 Kw
)
Based on Gross Calorific
Value.
5000 Kcal/h (
5.81 Kw
)
Based on Gross Calorific
Value.
8000 Kcal/h
(9.30Kw)
Based on Gross Calorific
Value.
Burner Orifice
Natural Gas 1.45 mm
LPG – Propane 1.00 mm
Natural Gas 1.95 mm
LPG – Propane 1.25 mm
Natural Gas 2.45 mm
LPG – Propane x 1.65 mm
Type of gas
Natural Gas
or
LPG - Propane
Natural Gas
or
LPG - Propane
Natural Gas
or
LPG - Propane
Model
S21 Mini 3 TE
S21 Mini 5 TE
Heat Input
2000 Kcal/h (
2.30 Kw
)
Based on Gross Calorific
Value.
3000 Kcal/h (
3.49 Kw
)
Based on Gross Calorific
Value.
Burner Orifice
Natural Gas 1.45 mm
LPG – Propane 1.00 mm
Natural Gas 2.10 mm
LPG – Propane 1.25 mm
Type of gas
Natural Gas
or
LPG - Propane
Natural Gas
or
LPG - Propane
This unit is equipped with an oxygen depletion safety system (O.D.S.). The
oxygen depletion safety system allows safe vent-free operation. When the
normal oxygen content (20.9%) is reduced to 18%, the pilot and main burner
will turn off and cannot be relit.
When the pilot flame is extinguished by wind or interruption of gas supply, it will
also turn off. Relighting is possible in this condition.
All models, except Mini 8, are fitted with a pressure regulator for Natural Gas.
The thermostat fitted to the models S21 Mini 3 TE and S21 Mini 5 TE, operates
from a maximum to a minimum input power of the main burner, as required by
the temperature in the room.
