- 5 -
•
Mark and drill the holes for the fixing anchors. For model Mini 8 a third hole
must be done. See figure 1c.
•
Screw the upper fixing screws some turns in the anchors.
•
Separate the front panel of the appliance by removing the two nuts at the
bottom and slide it up. See figure 3
•
Hang heater on fixing screws by means of holes provided at the rear of the
heater.
•
In model Mini 8, place and fix the bottom fixing screw.
Fig. 3
•
Connect the appliance to the gas supply line. The materials used must
conform the local codes and standards.
•
Once the appliance is connected, check for leaks. Use liquid detergent in
all joints. Never use a flame to look for gas leaks.
•
Reassemble the heater, slide the front panel through the front edges of the
cabinet back as shown in figure 4.
•
Place the screws, and fix them.
