6. Installation
6.1 Pre-mounting of suspension bushes on solar panels
Mount 2 suspension bushes per solar panel at the rear of the solar panel (= same side as the junction box). First insert the
stainless steel hexagon bolts M6x20 into the existing holes in the frame and secure the suspension bushes accordingly.
Subsequently mount the M6 nuts. The suspension bushes serve as a mounting aid in placing the solar panels.
6.2 Pre-mounting of connection strips
You can secure to the mounting rails mutually to one another with the included connection strips.
Slide the connection strip in the side of the mounting rail and mount it by using the supplied mounting screws 6,5 x19. The
tightening torque of the screw connections is 4.5 N/m.
If the total length of the coupled mounting rails is longer than 20m, a dilatation of a couple of millimetres is recommended.
07
Rev. 20.01.14
ASSEMBLY MANUAL FOR STEEL ROOFS
