Rev. 20.01.14
ASSEMBLY MANUAL FOR STEEL ROOFS
CONTENTS
pag
1.
Introduction
1
2.
General
installation
conditions
1
3.
Product
description
3
4.
Components
overview
3
4.1
Exploded-view
3
4.2
Component
list
4
5.
Mounting
preparation
5
5.1
Control
of
tools
and
accessories 5
5.2 Determining and measuring position solar panels
6
5.3
Cleaning
the
roof
6
6.
Installation 7
6.1 Pre-mounting of suspension bushes on solar panels
7
6.2
Pre-mounting
of
connection
strips
7
6.3
Securing
of
mounting
brackets
8
6.4
Securing
of
mounting
rail 9
6.5 Suspending solar panel onto mounting rail
10
6.6 Mounting 1st solar panel on the rails
11
6.7 Mounting of other solar panels on the rails
12
6.8 Final mounting /multiple rows underneath one another
13
7.
Appendix
14
THIS ASSEMBLY MANUAL NEEDS TO BE PROPERLY SAVED FOR FUTURE USE! For the duration and conditions
of the warranty we advise you to contact your supplier. In addition, we refer to our General Conditions which are avail-
able upon request.
The manufacturer explicitly rejects all liability for damage or injury resulting from not strictly adhering to this assembly
manual and failure to observe the usual care during transportation, assembly, and use of the ClickFit assembly
system.
It is possible that the product differs slightly from the description in this manual, as a result of our continuous efforts
towards improvement. For this reason the instructions need to be seen as only a guideline for the installation of the
product in this manual.
This manual has been prepared with the utmost care, but the manufacturer cannot accept responsibility for possible
errors in this manual or any possible consequences thereof. Furthermore, all rights are reserved and nothing in this
manual may be reproduced in any possible way.
