ESD QUICK 713, Инструкция по эксплуатации

Страница: 5 / 26

4
without frequent maintenance. High efficiency.
7. Heat resistant vacuum hose used prevents it from being burned by touching the heating parts.
3.3 SMD Rework part
3.3.1 Specification of the SMD Rework system
3.2.2 Characteristic of the De-soldering Tool
1. There is lock-function and the parameter setting with password protection.
2. Real-time operation and automatically sleeping function when putting the handle on the holder.
3. Closed loop sensor, temperature can be controlled by zero voltage triggering mode. Large power and rapid
heating. Temperature can be conveniently adjusted and the temperature is accurate and stable, and not affected
by airflow.
4. It is with a brushless whirlpool motor and the airflow is adjustable with a wide range but no level. It is a
multipurpose unit.
5. Automatic cooling system can prolong the heating element’s life and protect the handle.
3.2.3 Usage
1. It is suitable to the de-soldering of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on.
2. It is suitable to hot shrink, drying, remove lacquer and mucosity, thaw, preheating, disinfect and so on.
3. It is suitable for the situation needing different range airflow, softer or heavier.
Ⅳ. Prepare and Connection
Note: Check the parts in the package as the packing list. Some option parts may be not in the
package if do not order.
4.1 Connection of the Soldering Iron Part
1. Iron Holder and Sponge
(1) Dampen the small cleaning sponge with water and then squeeze it dry. Place it in the groove of the iron
holder base.
(2) Add a little water to the iron holder. The small sponge will absorb the water to keep the large sponge
above it wet all times. It may only use big sponge and not use small one.
(3) Dampen the larger cleaning sponge and place it on the iron holder base.
(4) During the operation, it also can clean the tip with the cleaning ball which is made of soft brass wires.
CAUTION:
If the sponge becomes dry during working, add appropriate water.
Power 1000W
Temperature range 100
℃
~500
℃
Airflow range 1~120
Maximal airflow 120 L/min