Hardware-Manual • Doc.-No.: I.2306.21 / Rev. 3.5
CPCI-405
Page 4 of 57
Safety Instructions
When working with CPCI-405 modules follow the instructions below and read the manual carefully to
protect yourself and the CPCI-405 module from damage.
The device is a built-in component. It is essential to ensure that the device is mounted in a way that
cannot lead to endangering or injury of persons or damage to objects.
Do not use damaged or defective cables to connect the CPCI-405 and follow the CAN wiring hints in
chapter: "Correct Wiring of Electrically Isolated CAN Networks"
The device has to be securely installed in the control cabinet before commissioning.
Protect the CPCI-405 module from dust, moisture and steam.
Protect the CPCI-405 module from shocks and vibrations.
The CPCI-405 module may become warm during normal use. Always allow adequate ventilation around
the CPCI-405 module and use care when handling.
Do not operate the CPCI-405 module adjacent to heat sources and do not expose it to unnecessary
thermal radiation. Ensure an ambient temperature as specified in the technical data.
Do not use damaged or defective cables to connect the CPCI-405 module.
In case of damages to the device, which might affect safety, appropriate and immediate measures must be
taken, that exclude an endangerment of persons and domestic animals and property.
Current circuits which are connected to the device have to be sufficiently protected against hazardous
voltage (SELV according to EN 60950-1).
The CPCI-405 may only be driven by power supply current circuits, that are contact protected. A power
supply, that provides a safety extra-low voltage (SELV or PELV) according to EN 60950-1, complies
with this conditions.
DANGER
Hazardous Voltage - Risk of electric shock due to unintentional contact with uninsulated live
parts with high voltages inside of the system into which the CPCI-405 is to be integrated.
Disconnect all hazardous voltages (mains voltage) before opening the system.
NOTICE
Electrostatic discharge may cause damage to electronic devices. In order to avoid this please
discharge your personal static electricity before you touch the module.
Qualified Personal
This documentation is directed exclusively towards qualified personal in control and automation engineering.
The installation and commissioning of the product may only be carried out by qualified personal, which is
authorized to put devices, systems and electric circuits into operation according to the applicable national
standards of safety engineering.
Conformity
The CPCI-405 is an industrial product and meets the demands of the EU regulations and EMC standards printed
in the conformity declaration at the end of this manual.
Warning:
In a residential, commercial or light industrial environment the CPCI-405 may cause radio
interferences in which case the user may be required to take adequate measures.
Data Safety
This device is equipped with an Ethernet or other interface which is suitable to establish a connection to data
networks. Depending on the software used on the device, these interfaces may allow attackers to compromise