iLog User Guide
3
Safety Instructions
In no circumstance should heavy force be applied to your iLog logger. Applying
heavy force to any part of your iLog could result in logger malfunction and/or injury.
Your iLog logger should only be operated within the parameters specified in the
technical data discussed within this user manual. A failure to follow these
instructions could result in you iLog logger malfunctioning and cause permanent
damage to the unit.
Certain models of iLog loggers are vulnerable to damage when contact with water
takes place. Please check your iLog loggers IP rating before placing your iLog
logger in such conditions.
Your iLog logger is not to be subjected to a naked flame. Exposures to such
conditions may result in damage to your iLog logger, and result in an explosion of
the battery.
Never operate your iLog logger with a low battery. We recommend that you replace
the battery as soon as the battery low symbol is indicated on your iLog logger’s
display.
For iLog loggers which operate external sensors, we recommend that the sensor be
unplugged by holding the gold connector, not removed via the sensor cable.
Do not attempt to repair or modify any part of this logger. Such actions will result in
a loss of warranty. All repairs are to be made by an official ESCORT Data logging
Systems service centre.
For iLog loggers which operate external sensors, it is important to keep the sensor
tip clean to ensure that the data collected is accurate.
Содержание iLog
Страница 1: ......
