Escort ELC-3133A, Быстрый старт

Страница: 8 / 16

MEASURING L/CR
Inductance/ Capacitance/ Resistance Measurement
1. Press “ L/C/R ” button to select inductance (L), capacitance (C) or
resistance (R) measurement.
2. Connect the BNC ends of red clip or SMD Tweezers to “ SENSE + ”
and “ FORCE + ”, respectively.
3. Connect the BNC ends of black clip or SMD Tweezers to “ SENSE
- ” and “ FORCE - ”, respectively.
4. Connect the test clips to the component leads as required or using
SMD Tweezers to measure SMD component.
5. Press “ FREQ ” button to select testing frequency.
6. Press “ D/Q/
θ
” button to select Q or D factor for secondary display
as necessary.
7. Remove your hands from clips then read the display readings.
8. Please refer to Figure-4~6 for inductance, capacitance and
resistance measurement.
u
FORCE SENSE
ON
OFF
SENSE FORCE
ALWAYS DISCHARGE THE CAPACITOR BEFORE TESTING
REC
HOLD RS232 D/Q/
P S AUTO
RANGE FREQ L/C/R
CAL
REL
θ
TOL
Red clip
Figure-4. Inductance Measurement
8