SAFETY INFORMATION
In this manual, "
WARNING
", is reserved for conditions and actions that
pose hazard(s) to the user; "
CAUTION
", is reserved for conditions and
actions that may damage your meter. Before using the meter, read the
following safety information carefully.
1. Before applying power, ensure that power cord and the proper line
voltage indicated for power source being used.
2. This product is grounding through the grounding conductor of the
power cord. To avoid electric shock, the grounding conductor must
be connected to earth ground. Before making any connections to the
input terminals of the products, ensure that the properly grounded.
3. To avoid personal injury, never operate the instrument without
covers or panels removed.
4. Do not operate this product in wet, damp or explosive atmosphere.
5. This meter is for indoor use, altitude up to 2,000 m.
6. The warnings and precautions should be read and well understood
before the instrument is used.
7. Use this device only as specified in this manual; otherwise, the
protection provided by the meter may be impaired.
8. When measuring in-circuit components, first de-energize the circuits
before connecting to the test leads.
9. Discharge the capacitor before testing.
10. The meter is safety-certified in compliance with EN61010 (IEC
1010-1). EMC is certified in compliance with EN61326-1.
11. International electrical symbols used in this manual as follows:
DC - Direct Current
See Explanation In The Manual
Protective conductor terminated.
Table-1. International Electrical Symbols
2
