FRONT PANEL ILLUSTRATION
1
2
3 4 5 6
7 8 9 10
11
12
Figure-1. Front panel
1.
POWER SWITCH:
used to turn the power ON and OFF.
2. LCD display
3.
RS232
: Press this button to toggle RS232 function On/OFF.
4.
HOLD
(
REC
): Press this button to hold data. Press this button for
more than 1 second to enter Static Recording for Maximum,
Minimum and Average reading.
5.
D/Q/
θ
:
Press this button to select Dissipation factor, Quality factor
and Phase angle displays.
6.
FREQ:
Press this button to select test frequency.
7.
RANGE (AUTO):
Press this button to select measuring range.
Press this button for more than 1 second to set auto range.
8.
L/C/R (P-S):
Press this button to select Inductance, Capacitance
and Resistance measurements. Press this button for more than
one second to toggle parallel and series mode.
9.
TOL:
Tolerance mode selection button
10.
REL (CAL):
Relative mode and Calibration selection button
11. Protective Ground to be connected a plate for preventing noise
influence.
12. Input Terminals.
4