ESCO Technologies ETS-Lindgren, Руководство по сборке и обслуживанию

Страница: 7 / 30

7
1.0 INTRODUCTION
Each
ETS-Lindgren Double Electrically Isolated (DEI) Enclosure
is tested at the
factory to verify that it provides the proper shielding.
1.1 ETS-LINDGREN PRODUCT INFORMATION BULLETIN
See the ETS-Lindgren Product Information Bulletin included with your shipment
for the following:
• Safety, regulatory, and other product marking information
• Steps to receive your shipment
• Steps to return a component for service
• ETS-Lindgren calibration service
• ETS-Lindgren contact information
Take care when
assembling the DEI
enclosure to avoid
causing an RF leak; an
RF leak can be created
by simply tightening a
bolt improperly.
An RF leak can
cause a large loss in
attenuation. At final
RF attenuation testing,
a low reading would
indicate a leak, or many
leaks, in the shielding.