8
ElectraGlide Instruction Manual
14. This picture shows the wings with wire wing
spar in place and servo leads connected
15. Slide one of the wing panels all the way into
the fusleage making sure the centre of the
wire wing spar stays in place and the ends of
the wire are pointing up.
15. Slide one other wing panel all the way into
the fusleage making sure the other wing
stays in place.
16. Check the aileron pushrods and clevises are
fi rmly attached.
Beginners should use the outside hole on the
aileron horn.
More advanced fl yers can use the inner
holes on the aileron horn to increase control
throws and sensitivity.
