6
ElectraGlide Instruction Manual
ASSEMBLING THE ELECTRAGLIDE
5.
Locate and test fi t the horizontal stabilizer
and elevator to the fuselage.
6.
Peel the proctective strip off the double sided
tape and carefully fi t the horizontal stabilizer
and elevator to the fuselage.
Alternatively, remove the double sided tape
completely and glue the horizontal stabilizer
in place using 5-15min epoxy.
7.
Locate the vertical fi n and rudder and test
fi t on the fuselage making sure the hinge on
the rudder fi ts into the slot on the end of the
fusleage (inset picture).
8.
Peel the proctective strip off the double sided
tape and carefully fi t the vertical fi n and
rudder to the fuselage.
Alternatively, remove the double sided tape
completely and glue the horizontal tail in
place using 5-15min epoxy.
9.
Check your alignment.
The vertical fi n should be at 90 degrees to the
horizontal stabilizer.
Tip - To aid with alignment you may prefer
to fi t the wings fi rst prior to attaching the
horizontal stabilzer and vertical fi n.
