2
19
3
7
Detail E
Note:
Wear safety glasses for
Step 9
.
If you want to see a video on how to insert Screw (#19) go to:
http://www.escaladesports.com/customer-service/videos.html
7
9.
Insert Screw #19 through slot in U-Clip #3 and the into U-
Support #7. Thread it all the way into U-Support #7 until it
touches the back of the tube. There should be about 3/8
inch of screw #19 left sticking out.
Do not
insert screw in
middle #3 U-Clip. See
Figure 4
and
Detail E. Repeat
for U-Leg (#2) and U clip (#3). See Detail F.
Or
Scan with your smartphone:
Note
: Rotate U-Support #7
until you see the screw hole in
the slot of U-clip #3. Slide U-
support #7 side to side and
front to back if necessary.
19
3
2
Detail F
Note
: Rotate U-leg #2 until
you see the screw hole in
the slot of U-clip #3. Slide
U-leg #2 side to side and
front to back if necessary.
Note:
Rotate U-Support #7 until you see the screw
hole in the slot of U-clip #3. Slide U-support #7 side
to side and front to back if necessary.
4
Figure
20
HARDWARE NEEDED
19
HARDWARE NEEDED
#8-32 X 1 1/4
Phillips Head Screw
(
Qty. 4
)
DO NOT
insert Screw
#19 in middle #3 U-clip.
DO NOT
insert Screw
#19 in middle #3 U-clip.
7
