13
CAUTION:
TO CLOSE:
1. Pivot the net post toward side of the table.
2. Unlock all four hinges.
3. Lift one table half to midpoint until the
plastic clips are engaged. Then continue
lifting until closed.
4. Raise other table half in the same manner.
....
as shown in Figure 15.
TO OPEN:
1. Hold center of top edge. Gently pull outward to midway position.
....
Continue to pull until disengaged from plastic clips and legs rest on the
....
floor as shown in Figure 13A and 13B. Do not leave table partially
....
opened at midway position.
2. Lower second top as described in step 1.
3. Lock all four center hinges. See Figure 14.
4. Attach net posts and net to table as shown in the
next page
.
PLAYING POSITION
IF TABLE IS NOT ALIGNING CORRECTLY:
(see Figure 16)
1. Set the table to the Playing Position and lock hinges as shown in
Figure 14.
2. Loosen Wing Nuts (#32) attached to bolt (#31) in order to create
enough slack to align table tops. See
.
Figure 3
3. With the help of two other adults, push the two table top halves so
they are in line with each other and re-tighten the Wing Nuts (#32) as
shown in
.
Figure 16
OPENING AND CLOSING INSTRUCTIONS
Push to lock hinge.
Plastic
Clip
EXERCISE CAUTION IN OPENING/CLOSING TABLE. SMALL CHILDREN, OR
CHILDREN NOT PROPERLY INSTRUCTED IN ITS USE, MUST NOT BE ALLOWED TO OPEN/CLOSE
TABLE. IMPROPER HANDLING AND MISUSE CAN RESULT IN SERIOUS INJURY OR DAMAGE.
DO NOT CLIMB, STAND, OR JUMP ON TABLE. MOISTURE AND CONDENSATION WILL
DAMAGE PLAYING SURFACE OF THIS TABLE. STORE IN DRY, INDOOR PLACE.
Midway
Position
PLAYBACK POSITION
Hinge
Locked
To lock hinge push up on
the table and push hinge
as shown in Figure 13B.
STORAGE POSITION
TOP VIEW
Figure 13A
Figure 13B
Figure 14
Figure 15
Figure 16
Caution: To prevent damage to the net system
and/or table top, the post assembly must be
pivoted toward side of table before lifting table
tops to storage position. Loosen knob and
pivot net post toward table side as far as it will
go . Re-tighten knob.
