21.
Attach Hinges (#18) to Strut Tubes (#17) as shown in
Figure 12
&
Detail B
. With hinge positioned as shown, align hole in hinge with hole
in Strut Tube and attach with ¼” Screw (#30), Plastic Washer (#38) and
Locknut (#34). Plastic Washer (#38) goes between Strut Tube and
Hinge. Tighten nut securely. Repeat for other Hinge.
CAUTION:
Hinges must be positioned exactly as shown or table will not
operate correctly and could be damaged.
22.
With at least two adults
, repeat steps 18 through 21 for other
table top assembly.
DO NOT OPEN THE TABLE TO PLAYING POSITION UNTIL
BOTH TOPS ARE INSTALLED! DO NOT LEAVE TABLE
STANDING UNATTENDED. IT COULD BE KNOCKED OVER
CAUSING SERIOUS BODILY INJURY OR PROPERTY DAMAGE.
Note: If hinge (#18) is positioned as shown in Detail M, you will have to
rotate the hinge to the position shown in Detail N. DO NOT unscrew the
hinge, you can rotate the hinge without unscrewing it from the table.
If you want to see a video on how to position hinge (#18) go to:
http://www.escaladesports.com/customer-service/videos.html
Or
Scan with your smartphone:
CAUTION
: Position hinges exactly as
shown in
Detail B
or table will not
operate correctly and could be damaged.
34
38
30
18
17
18
17
Detail A
ATTENTION:
If hinge is positioned as
shown below (
Detail A
), Rotate the hinge
as shown in
Detail B
. Do
not
take the
hinge off the table.
Detail B
Shipping position
of hinge
Assembly
position of hinge
Figure 12
12
