- 8 -
1 pc -
P16
Ball Dampening Net
1 pc -
P19
Ball Dampening Net
Cord (74-3/4”)
STEP 2:
Place
P16
, “G” logo down, onto completed
STEP 1
assembly. Be careful to orientate loops on both
P16
and the D-Rings on
P3
exactly as shown in
FIGURE 2
.
Next, attach
P19
Cord to end D-Ring and tie a double knot as shown in
FIGURE 2
. Carefully weave
P19
Cord through net loops and D-Rings. Pull cord tight and
finish by tying a double knot in end D-Ring as shown in
FIGURE 2
.
PARTS REQUIRED:
NOTE:
“G” Logo at the bottom
side of Ball Dampening Net.
P16
P3
Double
Knot
Double
Knot
FIGURE 2
P19
