ESCALADE Goalrilla TR2001, Инструкция по сборке

Страница: 7 / 21

- 7 -
IMPORTANT NOTE: Please “layout” parts exactly as per each assembly diagram. Please double check your layout to
the assembly diagram. Some parts look similar when in fact they are different. Also, please read and understand
each “IMPORTANT NOTE” added to assembly manual drawings as these notes will insure correct assembly. Also,
install all bolts in same direction as illustrated in each assembly step.
4 pcs - H1 20mm Allen Head Bolt 1 pc - P2R Front Top Right Corner
4 pcs - H2 40mm Flat Washer 1 pc - P3 Front Top Cross Beam
8 pcs - H5 Flat Washer 2 pcs - P4 Front Side Post
8 pcs -
H6
Lock Washer 1 pc -
T1
Allen Wrench
4 pcs - H7 Locknut 1 pc - Rubber Mallet
1 pc - P1L Front Top Left Corner 1 pc - 1/2” or 13mm End Wrench
PARTS REQUIRED:
STEP 1:
Connect all tubes as shown in FIGURE 1 .
Attach tubes together using hardware as shown in
FIGURE 1
.
Tighten all hardware.
FIGURE 1
P4
P4
P3
P2R
P1L
H2
H2
H1
H6
H5
H1
H6
H5
H7
H6
H5
H7
H6
H5
H1
H6
H5
H7
H6
H5
H1
H6
H5
H7
H6
H5
H2
H2
IMPORTANT NOTE:
Check to make sure these
2(two) D-Rings are in this
location.
IMPORTANT NOTE:
Check to make sure these
2(two) D-Rings are in this
location.