2
3/8” drive ratchet wrench
3” or longer extension
#2 Philips Head Screw Driver
10mm socket and wrench
13mm socket and wrench
16mm socket and wrench
17mm socket
19mm socket and wrench
4’ step ladder or other 4’ support
P
R
E
-
A
S
S
E
M
B
L
Y
T
I
P
S
Contact Escalade
®
Sports customer service department at:
Phone:
Toll – Free !
Fax:
1-866-873-3536
Toll – Free !
E-mail:
Mailing Address (correspondence only):
Escalade Sports
PO Box 889
Evansville, IN 47706
Please Do Not Return This Product To The Store!
1-888-USA-GOAL
2020 Escalade Sports
P R E - A S S E M B L Y T I P S
8” Adjustable Wrench
Rubber Mallet
¼” tip drift punch or 5/16” dia. X 8” long metal rod to assist with hole alignment
Utility knife or Rat Tail file to clear excess paint from holes
Funnel
3/8” Allen Wrench
Materials to cushion parts during assembly to prevent scratches/dings
Wooden Block (at least 3”x3”)
2L-7874-01
Please visit our Website at:
www.escaladesports.com
ON-LINE TROUBLE SHOOTING
TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS
FREQUENTLY ASKED QUESTIONS
ADDITIONAL ESCALADE
®
SPORTS PRODUCT INFORMATION
1. Read this manual carefully before starting assembly.
Read each step completely before beginning each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before assembling or ordering
parts.
3. To make assembly easier, use the Hardware Identifier on page 7 to identify and sort all fasteners. Check all cartons for kits.
All hardware may not be located in one kit.
Please keep your box
it could be used as an assembly aid. See page 29.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes may not align and
parts may not easily fit together. Leave locknuts slightly loose until you are instructed to tighten them.
5. Save these instructions and your proof of purchase (receipt) in the event that the manufacturer has to be contacted for
replacement parts.
6. Tools required for assembly:
Tools recommended for assembly:
