Esatto EDW606CS, Руководство пользователя

Страница: 9 / 32

esatto.house 9
WARNING:
A hose that attaches to a sink spray can burst if it is
installed on the same water line as the dishwasher.
If your sink has one, it is recommended that the hose
be disconnected and the hole plugged.
DRAIN HOSE CONNECTION
Insert the drain hose into a drain pipe with a minimum
diameter of 4 cm, or let it run into the sink, making
sure to avoid bending or crimping it. The height of
drain pipe must be less than 1000mm. The free end of
the hose must not be immersed in water to avoid the
back flow
of it.
Ensure that the drain hose is securely fixed in
either position A or position B.
How to drain excess water from hoses
If the sink is 1000 higher from the floor, the excess
water in hoses cannot be drained directly into the sink.
It will be necessary to drain excess water from hoses
into a bowl or suitable container that is held outside
and lower than the sink.
Water outlet
Connect the water drain hose. The drain hose must be
correctly fitted to avoid water leaks. Ensure that the
water drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a
similar drain hose. It must be no longer than 4 meters;
otherwise the cleaning effect of the dishwasher could
be reduced.
Syphon connection
The waste connection must be at a height less than
100 cm (maximum) from the bottom of the dish. The
water drain hose should be fixed.
Connection Of Drain Hoses
Please securely fix the drain hose in either position A or position B
B
A
MAX 1000mm
Counter
Drain hose
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run
into the sink, making sure to avoid bending or crimping it. The height of drain pipe
must be less than 1000mm. The free end of the hose must not be immersed in water
to avoid the back flow of it.
Extension hose
Water outlet
How to drain excess water from hoses
Syphon connection
If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained
directly into the sink. It will be necessary to drain excess water from hoses into a bowl
or suitable container that is held outside and lower than the sink.
Connect the water drain hose. The drain hose must be correctly fitted to avoid water
leaks. Ensure that the water drain hose is not kinked or squashed.
The waste connection must be at a height less than 100 cm (maximum) from the
bottom of the dish. The water drain hose should be fixed .
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher
could be reduced.
17
Back of dishwasher
Water Inlet
Drain Pipe
Mains Cable
Installation Instructions (Continued)