Esatto EDW606CS Скачать руководство пользователя страница 11

Страница: 11 / 32

esatto.house

• Consider buying utensils which are identified as

dishwasher-proof.

• For particular items, select a program with the

lowest possible temperature.

• To prevent damage, do not take glass and cutlery

out of the dishwasher immediately after the

program has ended.

CUTLERY/DISHES SUITABILITY

The following are not suitable

• Cutlery with wooden, horn china

or mother-of-pearl handles

• Plastic items that are not heat resistant

• Older cutlery with glued parts

that are not temperature resistant

• Bonded cutlery items or dishes

• Pewter or cooper items

• Crystal glass

• Steel items subject to rusting

• Wooden platters

• Items made from synthetic fibers

The following are of limited suitability

• Some types of glasses can become dull

after a large number of washes

• Silver and aluminum parts have a tendency

to discolour during washing

• Glazed patterns may fade if machine

washed frequently

RECOMMENDATIONS FOR LOADING

THE DISHWASHER

Scrape off any large amounts of leftover food. Soften

remnants of burnt food in pans. It is not necessary to

rinse the dishes under running water.

For best performance of the dishwasher, follow these

loading guidelines.

• Items such as cups, glasses, pots/pans, etc. are

faced downwards.

• Curved items, or ones with recesses, should be

loaded aslant so that water can run off.

• All utensils are stacked securely and can not tip

over.

• All utensils are placed in the way that the spray

arms can rotate freely during washing.

• Load hollow items such as cups, glasses, pans

etc. With the opening facing downwards so that

water cannot collect in the container or a deep

base.

• Dishes and items of cutlery must not lie inside one

another, or cover each other.

• To avoid damage, glasses should not touch

one another.

• The upper basket is designed to hold more

delicate and lighter dishware such as glasses,

coffee and tea cups.

• Long bladed knives stored in an upright position

are a potential hazard!

• Long and / or sharp items of cutlery such as

carving knives must be positioned horizontally

in the upper basket.

• Please do not overload your dishwasher.

This is important for good results and for

reasonable consumption of energy.

NOTE:

Very small items should not be washed in the

dishwasher as they could easily fall out of the basket.

Removing the dishes

To prevent water dripping from the upper basket into

the lower basket, we recommend that you empty the

lower basket first, followed by the upper basket.

WARNING

Items will be hot!

To prevent damage, do not take

glass and cutlery out of the dishwasher for around

15 minutes after the program has ended.

Loading the upper basket

The upper basket is designed to hold more

delicate and

lighter dishware such as glasses, coffee and tea cups

and saucers, as well as plates, small bowls and

shallow

pans (as long as they are not too dirty). Position the

dishes and cookware so that

they will not get moved by the

spray of water.

Loading the lower basket

We suggest that you place large items and the most

difficult to clean items are to be placed into the lower

basket: such as pots, pans, lids, serving dishes and

bowls, as shown in the figure below. It is preferable to

place serving dishes and lids on the side of the racks

in order to avoid blocking the rotation of the top spray

arm.

The maximum diameter advised

for plates in front of the detergent

dispenser is of 19 cm, this not to

hamper the opening of it.

Loading the cutlery basket

Cutlery should be placed in the cutlery rack separately

from each other in the appropriate positions, and do

make sure the utensils do not nest together, this may

cause bad performance.

WARNING

Do not let any item extend through the

bottom. Always load sharp utensils with the

sharp end downwards!

NOTE:

For the best washing effect, please load the baskets

referred in the Loading Recommendations section.

Loading the upper basket

The upper basket is designed to hold more delicate and
lighter dishware such as glasses, coffee and tea cups
and saucers, as well as plates, small bowls and shallow
pans (as long as they are not too dirty). Position the
dishes and cookware so that they will not get moved by
the spray of water.

WARNING

Do not let any item extend through
the bottom.

Always load sharp utensils with the

sharp point down!

Loading the cutlery basket

Cutlery should be placed in the cutlery rack separately from each other in the
appropriate positions, and do make sure the utensils do not nest together, this may
cause bad performance.

For the best washing effect, please load the baskets refer to standard
loading options on last section of PART

Generic Version

Ⅰ:

For the best washing effect, please load the baskets refer to standard
loading options on last section of PART

Ⅰ:

Generic Version

Loading the lower basket

We suggest that you place large items and the most
difficult to clean items are to be placed into the lower
basket: such as pots, pans, lids, serving dishes and bowls,
as shown in the figure below. It is preferable to place
serving dishes and lids on the side of the racks in order to
avoid blocking the rotation of the top spray arm.
The maximum diameter advised for plates in front of the
detergent dispenser is of 19 cm, this not to hamper the
opening of it.

Loading the upper basket

WARNING

Do not let any item extend through

the bottom.
Always load sharp utensils with the

sharp point down!

Loading the cutlery basket

Cutlery should be placed in the cutlery rack separately from each other in the
appropriate positions, and do make sure the utensils do not nest together, this may
cause bad performance.

For the best washing effect, please load the baskets refer to standard
loading options on last section of PART

Generic Version

Ⅰ:

For the best washing effect, please load the baskets refer to standard
loading options on last section of PART

Ⅰ:

Generic Version

Loading the lower basket

Load hollow items such as cups, glasses, pans etc. With the opening facing
downwards so that water cannot collect in the container or a deep base.
Dishes and items of cutlery must not lie inside one another, or cover each other.
To avoid damage, glasses should not touch one another.
The upper basket is designed to hold more delicate and lighter dishware such as
glasses, coffee and tea cups.
Long bladed knives stored in an upright position are a potential hazard!
Long and / or sharp items of cutlery such as carving knives must be positioned
horizontally in the upper basket.
Please do not overload your dishwasher. This is important for good results and for
reasonable consumption of energy.

NOTE

Very small items should not be washed in the dishwasher as they could easily fall
out of the basket.

To prevent water dripping from the upper basket into the lower basket, we
recommend that you empty the lower basket first, followed by the upper basket.

Removing the dishes

WARNING

Items will be hot!

To prevent damage, do not take glass and

cutlery out of the dishwasher for around 15 minutes after the
program has ended.

Loading the upper basket

WARNING

Do not let any item extend through
the bottom.
Always load sharp utensils with the
sharp point down!

Loading the cutlery basket

Cutlery should be placed in the cutlery rack separately from each other in the
appropriate positions, and do make sure the utensils do not nest together, this may
cause bad performance.

For the best washing effect, please load the baskets refer to standard
loading options on last section of PART

Generic Version

Ⅰ:

For the best washing effect, please load the baskets refer to standard
loading options on last section of PART

Ⅰ:

Generic Version

Loading the lower basket

Preparing & Loading Dishes