Esatto EDW606CS, Руководство пользователя

Страница: 14 / 32

User Manual 14
The rinse aid is released during the final rinse to
prevent water from forming droplets on your dishes,
which can leave spots and streaks. It also improves
drying by allowing water to roll off the dishes. Your
dishwasher is designed to use liquid rinse aids.
WARNING
Only use branded rinse aid for dishwasher. Never fill
the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent).
This would damage the appliance.
When to refill the rinse aid
The regularity of the dispenser needing to be refilled
depends on how often dishes are washed and the
rinse aid setting used.
• The Low Rinse Aid indicator (
5
RRaappiidd
A shorter wash for lightly soiled loads that do not
need drying.
9900 m miinn
For lightly soiled plates and pans that need quick wash.
G Gllaassss
For lightly soiled crockery and glass.
H Heeaavvyy
For heavily soiled loads, such as pots, plates, glasses and
lightly soiled pans.
EEC CO O
For normally soiled loads, such as pots, plates, glasses and
lightly soiled pans, standard everyday cycle.
Display
IInntteennssiivvee
For heaviest soiled crockery, such as pots, pans, casserole
dishes and dishes that have been sitting with dried food on
them for some time.
Program
indicator
8
Screen
Warning
indicator
To show the reminding time,delay time,error code etc.
W Waatteerr FFaauucceett
RRiinnssee A Aiidd
If the “ ” indicator is lit, it means the dishwasher is low
on dishwasher rinse aid and requires a refill.
If the “ ” indicator is lit, it means the water faucet closed.
9
10
) will appear in the
display when more rinse aid is needed.
• Do not overfill the rinse aid dispenser.
Function of detergent
The chemical ingredients that compose the detergent
are necessary to remove, crush and dispense all dirt
out of the dishwasher. Most of the commercial quality
detergents are suitable for this purpose.
WARNING
• Proper Use of Detergent
Use only detergent specifically made for
dishwashers use. Keep your detergent fresh and
dry.
• Don’t put powdered detergent into the dispenser
until you are ready to wash dishes.
• Dishwasher detergent is corrosive! Keep
dishwasher detergent out of the reach of
children
FILLING THE RINSE AID COMPARTMENT
STEP 1:
Remove the rinse aid compartment cap by lifting up
the handle.
STEP 2:
Pour the rinse aid into the dispenser, being careful
not to overfill.
STEP 3:
Close the cap when done.
Adjusting the rinse aid compartment
To achieve a better drying performance with limited
rinse aid, the dishwasher is designed to adjust the
consumption by user. Follow the below steps.
1. Switch on the appliance.
2. Within 60 seconds after step 1, press the Start/
Pause button more than 5 seconds to enter the set
model, the rinse aid indication blinks.
3. Press the Program button to select the proper set
according to your using habits, the sets will change
in the following sequence: D1, D2, D3, D4, D5, D1.
The higher the number, the more rinse aid the
dishwasher uses.
4. Without operation in 5 seconds or press the Power
button to exit the set model, the set success.
The rinse aid is released during the final rinse to prevent water from forming droplets
on your dishes, which can leave spots and streaks. It also improves drying by allowing
water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids.
WARNING
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser
with any other substances (e.g. Dishwasher cleaning agent, liquid detergent).
This would damage the appliance.
Function Of The Rinse Aid And Detergent
Function of detergent
The chemical ingredients that compose the detergent are necessary to remove, crush and
dispense all dirt out of the dishwasher. Most of the commercial quality detergents are
suitable for this purpose.
WARNING
Proper Use of Detergent
Use only detergent specifically made for dishwashers use. Keep your detergent
fresh and dry.
Don't put powdered detergent into the dispenser until you are ready to wash
dishes.
Dishwasher detergent is corrosive! Keep dishwasher
detergent out of the reach of children.
9
When to refill the rinse aid
The regularity of the dispenser needing to be refilled depends on how often dishes are
washed and the rinse aid setting used.
The Low Rinse Aid indicator ( ) will appear in the display when more rinse aid
is needed.
Do not overfill the rinse aid dispenser.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1. .
2.
Within 60 seconds after step 1, press the Start/Pause button more than 5 seconds
to enter the set model, the rinse aid indication blinks as 1Hz frequency.
3. Press the Program button to select the proper set according to your using habits ,
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to exit the set model,
the set success.
Switch on the appliance
10
Filling The Rinse Aid Reservoir
3
Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1. .
2. Within 60 seconds after step 1, press the Start/Pause button more than 5 seconds
to enter the set model, the rinse aid indication blinks as 1Hz frequency.
3. Press the Program button to select the proper set according to your using habits ,
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to exit the set model,
the set success.
Switch on the appliance
10
Filling The Rinse Aid Reservoir
3 Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1. .
2.
Within 60 seconds after step 1, press the Start/Pause button more than 5 seconds
to enter the set model, the rinse aid indication blinks as 1Hz frequency.
3.
Press the Program button to select the proper set according to your using habits ,
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to exit the set model,
the set success.
Switch on the appliance
10
Filling The Rinse Aid Reservoir
3
Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
Rinse Aid & Detergent