Esatto EDW606CS, Руководство пользователя

Страница: 17 / 32

esatto.house 17
STARTING A CYCLE WASH
1. Draw out the lower and upper basket, load the
dishes and push them back. It is recommended to
load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The Power supply
refer to the Technical Specifications section.
4. Make sure that the water supply is turned on to full
pressure.
5. Close the door, press the Power button, to switch
on the machine.
6. Choose a program, the response light will turn on.
Then press the Start/Pause button, the dishwasher
will start its cycle.
CHANGING THE PROGRAM MID-CYCLE
A wash cycle can only be changed if it has been
running for a short time otherwise, the detergent
may have already been released and the dishwasher
may have already drained the wash water. If this is
the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the
washing.
2. Press program button for more than 3 seconds.
The program will cancel.
3. Press the program button to select the desired
program.
4. Press the Start/Pause button, after 10 seconds,
the dishwasher will start.
ADDING A DISH MID-CYCLE
A forgotten dish can be added any time before the
detergent dispenser opens. If this is the case, follow
the instructions below:
1. Press the Start/Pause button to pause the
washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press the Start/Pause button after 10 seconds,
the dishwasher will start.
WARNING
It is dangerous to open the door mid-cycle, as hot
steam may scald you.
Starting A Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The Power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
1.
Press the Start/Pause button to pause the washing.
2. Press program button for more than 3 seconds - the program will cancel.
3. Press the program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.
3 sec
13
*AS/NZS 2007.1:
test in accordance with
This program is the test cycle. The information for comparability
*AS/NZS 2007.1.
NOTE :
Forget To Add A Dish?
A forgotten dish can be added any time before the detergent dispenser opens. If
this is the case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5.
Press the Start/Pause button after 10 seconds, the dishwasher will start.
After 5 sec
WARNING
It is dangerous to open the door
mid-cycle, as hot steam may
scald you.
14
Operation Instructions (Continued)