Esaote MyLabSigma elite, Начало работы, Страница: 73 / 134

MyLab
- G E T T I N G S T A R T E D 5 - 1
Chapter
5
GETTI
NG STARTED
5. Using MyLab
This chapter provides a brief description of the device controls.
AO
Refer to the “Advanced Operations Manual” for further detailed information.
Connecting MyLab to the mains
The power plug and the electrical main switch (when present) are located on
the rear-bottom of the
MyLab
. The power plug symbol is screen-printed on
the console plastic.
Procedure 1. Plug in the power cord.
2. Connect
MyLab
to the power mains.
WARNING
When installing
MyLab
, check that the power cable is not tightly bent, that
it can’t be squashed by a misplaced foot or by heavy objects.
The earth terminal can be connected to an external protective earthing system
as additional protection. This connection is not necessary in most cases, and
is only recommended for situations involving multiple equipment in a high-
risk patient environment, to provide assurance that all equipment is at the
same potential and operates within acceptable leakage current limits.
Turning MyLab On and Off
At the examination site:
1. Place
MyLab
into its final position.
2. Position the monitor where you want it.
3. Connect the network and other cables from
MyLab
to the
appropriate wall plugs.
4. Plug the cable to a reliable grounding power outlet to assure
adequate grounding.
5. Press
O N /O FF
to turn on
MyLab
.