manualshive.com logo in svg

Esaote MyLabSigma elite, Начало работы, Страница: 64 / 134

Поделиться
Скачать
Esaote MyLabSigma elite Скачать руководство пользователя страница 64

P R E P A R I N G   T H E   S Y S T E M

MyLab

  -   G E T T I N G   S T A R T E D

4 - 2

Connecting Peripherals

Peripherals, that have been ordered simultaneously with 

MyLab

, are usually

already mounted and connected. The first mounting and connecting will
usually be performed by an Esaote technician.

NOTE

Esaote suggests to contact its Service representative to install any auxiliary

device.

Before installing the peripheral devices, make sure that 

MyLab

 is switched off

and unplug the power cable from the mains outlet. Brake the wheel to fix

MyLab

.

How to connect peripheral devices:

1. Ensure that the 

MyLab

 is switched off (complete shut down 

not stand-by or other conditions).

2. Connect the peripheral device to the 

MyLab

.

3. Switch the peripheral device on, making sure that the device 

is not in stand-by condition.

4. Switch the 

MyLab

 on by pressing the Power ON button.

NOTE

Always observe the instructions given in the manual of the peripheral/

auxiliary device.

NOTE

Contact Esaote personnel for recommended USB printers and for safe and

proper installation.

NOTE

Not all the external monitors are compatible with 

MyLab

. Please contact

your Service representative to select an external monitor that can be

managed by 

MyLab

.

Safety Concept

MyLab

 trolley can be equipped with an insulation transformer to provide

required separation from AC mains for both 

MyLab

 and the auxiliary devices. 

Additional equipment connected to 

MyLab

 must comply with respective IEC

or ISO standards (e.g. IEC 60950 for data processing equipment).
Furthermore, all configurations shall comply with the requirements for
medical electrical systems (see IEC 60601-1-1 or clause 16 of the 3rd Edition
of IEC 60601-1, respectively).

Anybody connecting additional equipment to medical electrical equipment
configures a medical system and is therefore responsible that the system

Содержание MyLabSigma elite







































































































































Отзывы:

Нет отзывов