manualshive.com logo in svg

Esaote MyLabSigma elite, Начало работы, Страница: 117 / 134

Поделиться
Скачать
Esaote MyLabSigma elite Скачать руководство пользователя страница 117

P E R F O R M I N G   A N   E X A M

MyLab

  -   G E T T I N G   S T A R T E D

7 - 7

GETTI

NG STARTED

Performing the Exam

MyLab 

offers a set of imaging modes to cover a variety of imaging needs. By

pressing the different mode buttons the specific mode is activated in real
time. If the same button is pressed again, 

MyLab 

automatically returns to the

previous presentation.

Special modes are also available for 3D imaging and advanced imaging.

Touchscreen buttons change according to the activated mode.

When more modes are active, the navigation tabs (

B-MODE

, 

M-MODE

) allow

the operator to scroll among the specific mode menu. If the displayed menu
has several levels, tap 

ADV>>

 / 

BASIC<<

 to scroll through all functions.

 

AO

The control panel buttons and the commands displayed on the touchscreen
make it possible to optimize presentation quality. Different menus
correspond to each format., the “Advanced Operations” manual provides a
detailed description of all active controls in the different modes.

Acquiring images

MyLab 

allows to capture and save a single image or a cineloop sequence

pressing 

IM AG E 

or

 C LIP

 respectively.

These buttons respectively save still frames and clips in real time. Images are
also saved in Freeze.

Images and clips are saved in patient study and thumbnails of the saved data
are shown downwards in chronological order on the right side of the screen.

Single images are saved with full definition or compressed, whereas sequences
are compressed with a minimum loss of information.

 

AO

Compression of both images and clips to be saved on external media can be
set: refer to the “Archiving” section for further information.

Freeze and Scrolling Memories

Use 

FREEZE

 to stop and start real-time image acquisition and update.

At 

FREEZE

 pressure 

MyLab 

displays the scroll bar of the memories, assigning

the trackball to manual cineloop review (frame-by-frame). Move the trackball
horizontally to scroll through the images one by one. The scrolling bar shows
the trackball position.

 

AO

The “Advanced Operations” manual provides a detailed description of all the
available controls in Freeze.

Содержание MyLabSigma elite







































































































































Отзывы:

Нет отзывов