Esaote mylab 25 gold, Краткое руководство пользователя

Страница: 42 / 60

QG_ML25-30GOLD-RevC-3 19-03-2009 10:10 Pagina 42
Colori compositi
C M Y CM MY CY CMY K
Procedure
Selective Clearing of Measurements
1. Activate the trackball as a pointer by pressing the POINTER key.
2. Position the pointer on the measurement to be cleared (the measurement is
displayed in yellow).
3. Press the CLEAR key to clear the measurement.
4. Press POINTER again to return to the measurements menu.
The CLEAR ALL key deletes all measurement cursors and the values displayed in
the measurements field from the screen.
The UNDO key can be used to interrupt a single measurement before it has been
confirmed; the ACTION key interrupts the measurement sequence and exits from
the measurement session.
The measurements already performed are marked with the symbol.
3. Select the single parameter or the group to be measured by using the
trackball (or by pressing the
MEASURE key) and press ENTER to confirm.
4. Follow the instructions to perform the measurement: the value of measured
parameters are displayed on the left of the screen.