Esaote 350009500, Начало работы, Страница: 84 / 114

MyLab
- G E T T I N G S T A R T E D
7 - 8
The thumbnails of the saved data are shown downwards in chronological order on
the right side of the screen.

AO
The “Advanced Operations” manual provides a detailed description of all active
controls in the different modes.
2D and CFM Clips with High Frame Rate
MyLab
allows the acquisition of 2D and CFM Clips with high frame rate.
Clips with high frame rate are acquired in Retrospective Mode. In this modality the
system continuously captures consecutive loops, the
ACQUIRE key stops the
acquisition and the last captured loops are shown on the screen.
Acquisition Procedure
Follow the procedure below to acquire clips with high frame rate:
Procedure

Enter the patient’s data,

Select the probe, the desired application and preset and press
OK to confirm,

Start scanning and press the ACQUIRE key: the system freezes
and displays the last acquired cycles in cine mode.

Press ACQUIRE to save the sequence.
The number of acquired loops depends on the set value (
CLIPS DUR
toggle).
High frame rate clip symbol (Clip ART)
2D and CFM Clips acquired with the ECG signal (
PH YSIO
button)
synchronization and using this modality are identified by a specific symbol, shown
here on the left. These clips are indicated as Clip ART clips within the manual.
WARNING
Do not use the physiological trace displayed on the screen for diagnosis or
monitoring.
Freeze and Scrolling Memories
The FREEZE key freezes the image. The system displays the scroll bar of the
memories, where the images acquired just before the system was frozen are
temporarily saved.