Esaote 350009500, Начало работы, Страница: 77 / 114

MyLab
- G E T T I N G S T A R T E D
7 - 1
Chapter
7
GETTI
NG STARTED
7- Performing an Exam
This chapter describes the operations usually carried out to start and end an exam.
 SS
Read the “Safety and Standards” manual carefully: all the safety characteristics,
cautions and warnings listed there apply to all exams.
Remember that it is necessary to be familiar with the mechanical and thermal
indices display and the ALARA principle (As Low As Reasonably Achievable)
before using any probe. The patient must be exposed to ultrasound for as short a
time as possible and only for as long as it takes to achieve the diagnostic
information.
Exam Start and End
At power-up, at end of the initial autotest and at the start of every new exam the
system displays both the Patient ID screen and the touchscreen that allows the
operator to enter patient data and application and to select the probe, the
application and the preset (
PRO BE
button).

AO
CAUTION
Do not turn the system off during the initialization phase: the hard disk
could be damaged by this operation.
Note
At start up
MyLab
displays the window allowing to select the
configuration, when more system configurations are set. See further
in this manual and in the “Advanced Operations” manual for
detailed information.