Esaote 350009500, Начало работы, Страница: 102 / 114

MyLab
- G E T T I N G S T A R T E D
11 - 2
To clean the peripheral devices, follow the instructions supplied by the
manufacturer.
Veterinary Applications
WARNING
Due to the specificity of the veterinary working place, Esaote recommends
the ultrasound machines used in veterinary applications should be
thoroughly cleaned at least once every 6 months. Please contact your Esaote
distributor/ dealer for further help in this matter.
WARNING
Turn the system off and unplug it before any cleaning operation.
Cleaning the system To clean the system, use a soft cloth slightly dampened with water. If necessary,
apply a small amount of ammonia-free and not abrasive detergent on a clean, soft
cloth and then wipe the surface. Switch the system off and rub the outside with the
cloth.
WARNING
Make sure that the detergent has completely evaporated before turning the
equipment on.
CAUTION
Do not use any type of ammonia- or benzene-based cleaners on the case.
Trackball
The trackball can be accessed, for cleaning purpose only, by rotating the upper
locking disk clockwise.
Clean the ball rotating it in its socket. Do not remove the ball from the socket.
The X-series trackballs contain two 855 nm semiconductor lasers. The device is
designed such that it fulfills laser safety class 1M regulations according to
IEC60825-1 edition 1.2, 2001-08’.
The laser radiation emitted is invisible to the human eye.
Although not considered harmful, staring into the beams is not advised. Staring
into the beams by means of optical aids such as eye loupes, magnifiers,
microscopes, lenses or other optical means within a distance of 100 mm might
cause permanent damage to the human eye.
WARNING
Invisible laser radiation. Do not view directly with optical instruments.
Class 1M laser product.