6
Put the far pin in first, and slide it to the end. …. Insert closest pin in the proper hole.
Once installed, the registration posts adjust to fit comfortably against the paper
edges. To loosen the posts, turn counterclockwise. This will allow them to slide
within the slots to provide a firm registration edge for the ballots. This paper guide
can also be used for 14-inch ballots by moving the registration posts into the 14-
inch slots. The picture below has each of the slots labeled. To move the
registration posts from one slot to the other, loosen the post and slide all the way
out to the side to remove. Place the registration posts in the proper slots and slide
them against the ballot edge before tightening. These should be set so that the
paper centers between the main paper guides.
Slots for 14 and 17 inch ballots. ……….Turn counter-clockwise to loosen and adjust.
Tighten gently against ballot edges. ……………It should be centered between the guides.
