
-- 61 --
fzb2d3ea
12.15 Test
Cable area (mm2)
X
Weldhead offset, mm
START SEQUENCE MENU
STOP SEQUENCE MENU
CALIBRATION MENU
DISPLAY MENU
ERROR LIST
Test
0 / 1 / 2
When this menu is active, the main menu displays information that is normally
hidden
Test = 0
The function is not active.
Test = 1
Wire feed speed is shown in the MAIN MENU according to the figure below.
This is
Not deactivated
when the power is off.
Wire feed speed
(cm/ min)
Test = 2
Speed and motor current for both motors are shown in the MAIN MENU according to
the figure below. This is
deactivated
when the power is off.
Travel speed (cm/ min)
Wire feed speed (cm/ min)
Motor current for travel
Motor current for wire feed
GB
Содержание PEH 4.3
