ESAB PCM-500i, Инструкция по эксплуатации

Страница: 39 / 40

The "B" edition of (10/98) of this manual covers the following changes that have occurred between May, 1997 (Serial
No. PX-I618001) and September, 1998:
1. Removed the L-TEC and the European CE labeled packages. L-TEC units were discontinued. CE units are now
covered in F-15-417 and F-15-424.
2. TB5 Terminal Block (950487) was added to simplify reconnection from 230Vac input to 208Vac.
3. Changed L1 Output Inductor 32909 to 952606 and in series with torch switch leads from J1 to PCB to provide more
protection for the PCB.
4. Added saturable core output Inductor (952002) for improved performance.
5. Thermal Pads are now included with IBGT's and Bridge Modules.
6. On the 208/230Vac units, the Q1 and Q2 50A IGBT's (952148) was changed to 100A IGBT (951205).
7. On the 208/230Vac units, the 10-ft. Input Power Cable (34574) was changed to 6-ft. cable (36673).
The "C" edition (1/02) of this manual covers the following changes:
1. Wiring Diagram 36403 has been updated.
2. Item 116 (P/N 36673) was changed to (P/N 34574) and the Plug (208/230 V) was changed from 6 Ft. to 10 Ft.
The "D" edition (06/03) of this manual covers the following changes:
1. Item 80 Description on Page 37 was changed from 0.25 GPM to 2.5 SCFM.
The "E" edition (02/04) of this manual covers the following changes:
1. Revised Spare Parts Kit from 21980 to 0558003301.
39