ESAB PCM-500i, Инструкция по эксплуатации

Страница: 12 / 40

SECTION 2 INSTALLATION
12
Figure 2-1. PCM-500i Interconnection Diagram
CUSTOMER FUSED LINE
DISCONNECT SWITCH
(See Table 2.1 and WARNING in
regards to chassis ground in Sec-
tion 2.5.)
See Table 2.1
WORK CABLE
SAFETY
GROUND
TORCH
POWER CABLE
CONNECTION
PT-31XL
WORK
PLUG
(Equipped only on
230 V, 1-phase units)
between work and power
source
Allow at least 10 ft (3 m)
ACCESS DOOR FOR
TORCH CONNECTION.
NOTE: If using 208 V input,
see Section 2.7 and
Fig. 2-2.
RECEPTACLE (P/N 674540)
(Optional for 208/230 V, 1-phase
power sources)
TORCH SWITCH
RECEPTACLE
Prefiltered AIR SUPPLY (Customer Supplied)
(90 to 150 psig max)