ESAB Origo Feed 304N P4, Руководство пользователя, Страница: 24 / 60

5 DIMENSIONS
6 INSTALLATION
6.1) Recebimento
At receiving an Origo Feed 304N P4 remove all the packaging material around the unit and check for
possible damages that could have happened during transport. Any complaints related to transport damage
should be directed to the transport company.
™
Remove carefully any material that could obstruct the refrigeration air system.
6.2) Working area
Several facts should be taken into consideration when determining the working place of a welding machine,
in order to have a safe and efficient operation. An adequate ventilation is needed for the refrigeration of the
equipment and for the operator’s safety.
The installation of any filter dispositive in the environment restricts the air volume availabe for the machine
refrigeration which can cause overheating to the internal equipment. All guarantee undertakings from the
supplier cease to apply if the customer/user installs any filter dispositive not authorized by the supplier.
Note: In case an Origo Feed 304 P4 is not installed immediately, keep it in its
™
original packaging or store it in a dry and well ventilated place.
N.B. DO NOT USE THE MAIN SOURCE NEUTRAL FOR EARTH
CONNECTION. :
All the eletric connections should be fitted completely to avoid risk of
sparklings, over heating or voltage slopes in the circuits.
- 24 -
6.3) Installation of the feeder
1) Connect the wire feeder to the power source through the cable of comand.
2) Fix the welding cable connected to the te power source in the terminal in the wire feeder.
3) Fix the hose of the gas pressure regulator in the inlet niple of the rear solenoid valvule of the wire feeder.
4) Install the welding gun (see especific manual).
5) Install the wire.
6) Install the feed rollers according to the type and wire diameter to be used.
- 25 -
Wire diameter (mm)
Input noozle
Intermediate noozle
Output noozle
0,60 - 1,60
0900988
0900368
0900261
1,60 - 3,20
0901094
0900896
0900618
TABELA 5.1
Table 6.1
Table 6.2
Pressure roller
Steel
Aluminiun
Cored
0,60 - 0,80
0,80 - 1,00
1,00 - 1,20
1,20 - 1,60
1,00 - 1,20
1,20 - 1,60
2,40 - 3,20
1,20 - 1,60
1,60 - 2,40
Wire type Diameter (mm)
2,80 - 3,20
0900467
0900905
0900251
0901338
0900822
0900168
0901272
0900732
0900121
0901204
0902230
230 mm
570 mm
380 mm