ESAB Origo Feed 304N P4, Руководство пользователя, Страница: 22 / 60

2 INTRODUCCION
The Origo Feed 304N P4 wire feeders are designed for semi-automatic MIG/MAG welding with solid wires,
cored and aluminium in services of average and heavy production.
They have a wire feed mechanism of 4 feed rollers engaged and an electronic control system. They can be
™
installed on the power source or on a wheel kit to move it around the workplace (optional).
4.1) Front panel
4.2) Side console
2 stroke
4 stroke
1- Knob for setting wire feed speed.
2- Knob for setting the voltage.
3- Digital voltmeter/ampermeter. To display the parameters of welding, voltage and current. After the
welding it maintains the set values shown on the display.
4- Connector for welding gun.
5- Interruptor of manual wire release - Allows the wire to be fed without voltage in the welding gun.
6- Remote/panel switch - to select the control by front panel OrigoFeed 304N P4 or by remote control.
7- Remote socket - connector for the remote control
8- Burnback - Burnback time is a delay between the time when the wire starts to brake until the time when
the power source switches off the welding voltage.Too short burnback time results in a long wire stickout
after completion of welding, with a risk of the wire being caught in the solidifying weld pool. Too long a
burnback time results in a shorter stickout, with increased risk of the arc striking back to the contact tip.
9- 2/4 Stroke - With , wire feed starts when the trigger switch is pressed in and ends when it is
released. With , the gas flow starts when the trigger switch is pressed in and the wire feed starts
when it is released. The welding process continues until the switch is pressed in again, the wire feed
stops and when the switch is released the gas stops flowing.
10- Wire feed mechanism.
3 TECHNICAL DATA
4 CONTROLS AND CONNECTORS
- 22 -
42 - 50/60
1,5 - 22,0
0,6 - 1,6
1,0 - 2,4
0,8 - 1,6
Euro-conector
Yes
Yes
Yes
Yes
Yes
Optional
0 - 0,5
230 x 570 x 380 (without bobbin cover)
230 x 570 x 455 (with bobbin cover)
15,4
Power supply (V - Hz)
Wire feed speed (m/mm)
Wire diameter (mm)
Solid steel
Cored wire
Aluminium
Welding gun connection
Digital Voltmeter/ampermeter
2/4 Stroke
Welding source voltage setting
Manual feeding of the wire
Remote control
Bobbin cover
Burnback (sec.)
Dimensions (W x L x H) (mm)
Weight (kg)
4.3) Rear panel
11- Connection for welding current from power source.
12- Connection for control cable from power source.
13- Connection for shielding gas.
14- Brake Hub.
15- Inlet Nozzle.
- 23 -
14
15
12
11
13
8
9
10
1
2
5
6
7
3
4