ESAB Origo Feed 30, Инструкция по эксплуатации

Страница: 16 / 19

Origo
TM
Feed 30, Feed 30w
Edition070426
-- 16 --
wOF302
Wear components
(W. F. Mechanism 0349 484 083)
Item Denomination Ordering no. Notes
A Feed / pressure roller
0349 484 335
0349 484 339
0349 484 342
0349 484 341
0349 484 338
0349 484 340
Ø 0.8--1.0mm Fe, Ss, cored wire, V--groove.
Ø 1.2--1.6mm Fe, Ss, cored wire, V--groove.
Ø 1.0--1.2mm cored wire, V--groove, knurled.
Ø 1.2--1.6mm cored wire, V--groove, knurled.
Ø 1.0--1.2mm Al, U--groove.
Ø 1.2--1.6mm Al, U--groove.
B Gear adapter 0349 484 355
C Drive gear 0349 484 356
D Pressure roller 0349 484 346 Fe, Ss, cored wire, Al
E Inlet nozzle 0349 308 000 Fe, Ss, cored wire, Al
F Intermediate nozzle 0349 484 344 Fe, Ss, cored wire, Al
G Outlet nozzle
0349 304 793
0349 305 089
Ø 2.0 steel for Fe, Ss, cored wire
Ø 2.0 plastic for Al
H Liner 0349 496 716 Fe, Ss, cored wire, Al
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wires.
In order to weld with aluminium wires, proper rollers, nozzles and liners for
aluminium wires MUST be used. It is recommended to use 3m long welding gun for
aluminium wires, equipped with appropriate wear parts.