ESAB MT-300GL, Инструкция по эксплуатации

Страница: 20 / 32

20
3.2 -GUN INSTALLATION
3.2.1 INSTALLING GUN TO WIRE FEEDER
•
Feed the welding wire through wire feeder connector by hand and tighten drive rolls.
•
Be sure to use the correct outlet wire guide recommended for use with the wire feeder being used
•
Insert the gun Euro Connector into the mating connector of the wire feeder and tighten securely with the hand
nut of the gun connector assembly.
3.3 WIRE FEEDER EURO ADAPTOR ASSEMBLY
( for ESAB MIG-35 or DIGIMIG Wire Feeders)
Gun
Euro Connector
Wire Feeder
Euro Connector
EURO ADAPTOR ASSEMBLY
Part Number - 20572
•
Use this adaptor assembly when connecting to an ESAB Mig-35 or Digimig wire feeder either 2 roll or 4 roll mod-
els.
•
Insert the gun Euro Connector into the mating connector of the wire feeder and tighten securely with the hand
nut of the gun connector assembly.
•
Be sure to use the outlet wire guide recommended for the wire size and type being used. Several outlet guides are
included with the adaptor assembly.
SECTION 3 INSTALLATION