![ESAB MT-300GL Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/esab/mt-300gl/mt-300gl_instruction-manual_2424794019.webp)
19
STEP #2
•
Feed liner into the euro connector and completely
through the unicable using short strokes to avoid
kinking. Twist liner clockwise if necessary.
•
Seat liner retainer with o-ring to shoulder inside liner
seat.
•
Secure by tightening liner set screw.
Do not over-
tighten.
STEP #3
•
Trim conduit liner to 5/8” (16 mm) stick out.
•
Remove any burr that may obstruct wire feed, espe-
cially on flat wire type conduit liner.
3.1 LINER INSTALLATION
STEP #1
Ensure power source is off and torch is re-
moved from feeder before proceeding.
•
Remove insulator nozzle, tip and tip adaptor
and loosen liner set screw using 5/64” (2 mm)
Allen wrench supplied with the gun.
•
With torch straightened, grip conduit liner
with pliers and remove.
•
Liners and contact tips are not supplied with guns and must be ordered and
installed separately. Follow the simple instructions below for proper installation
Liners for MT-300GL, 400GL & 500GL
(10, 12 & 15 ft.)
Hard Wires
.030 (0.8mm) ...................................................................... 37031
.035 (0.9mm) ...................................................................... 37032
.045-1/16 (1.2-1.6mm) .................................................... 37033
5/64-3/32 (2-2.4mm) ....................................................... 37034
7/64-1/8 (2.8-3.2mm) ....................................................952948
SECTION 3
INSTALLATION
Содержание MT-300GL
