ESAB LKA 180, Инструкция по эксплуатации

Страница: 4 / 23

− 4 −
bc05d18e
3 INTRODUCTION
LKA 180/240 is a compact, step − switched Welding power sources, intended for
welding with solid wire with shielding gas and tube electrode without gas.
The complete package comprises a power source with integral wire feed unit,
(PSF 160 welding torch), mains lead, return cable with clamp, feed rollers for 0.6
and 0.8 mm wire and a gas hose. The assembly kit includes a handle, rear axle, 2
rear wheels and 2 castors.
Two control knobs provide adjustment of voltage and wire feed speed, which are
easily selected by referring to the table on page 9.
You can switch between solid wire with shielding gas and tube electrode without gas
by simply swi and − connections on the terminal above the wire feed unit.
The spot welding function simplifies the task of making lap joints in sheet metal. A
thermal cut − out prevents the power source from overheating. The cut − out is reset
atomatically when the power source has cooled.
4 TECHNICAL DATA
LKA 180 LKA 240 LKA 180 1 − phase
Mains supply 230/400 V,
3 − phase 50 Hz
230/400 V,
3 − phase 50 Hz
230 V, 1 − phase
50 Hz
Mains lead 4x2,5 mm @ 4x2,5 mm @ 3x2,5 mm @
Fuse, slow 10 A 16 A 16 A
Maximum load
10% 165 A 160 A
20% 200 A
60% 65 A 120 A 75 A
100% 60 A 85 A 60 A
Mains supply 400 V, 3 − phase 50 Hz 400 V,3 − phase 50 Hz
Mains lead 4x1,5 mm @ 4x1,5 mm @
Fuse, slow 10 A 10 A
Maximum load
11% 170 A
18% 200 A
60% 75 A 110 A
100% 60 A 85 A
Voltage steps 7 10 7
Open circuit voltage 15 − 33 V 18 − 36 V 16 − 33 V
Wire feed speed 1 − 15 m/min 1 − 15 m/min 1 − 15 m/min
Spot welding time 250 ms − 2,5 s 250 ms − 2,5 s 250 ms − 2,5 s
Wire reel 5 − 15 kg 5 − 15 kg 5 − 15 kg
GB