ESAB Heliarc 161, Инструкция по эксплуатации

Страница: 2 / 32

2
These INSTRUCTIONS are for experienced operators. If you are not fully familiar
with the principles of operation and safe practices for arc welding and cutting equip-
ment, we urge you to read our booklet, "Precautions and Safe Practices for Arc Weld-
ing, Cutting, and Gouging," Form 52-529. Do NOT permit untrained persons to install,
operate, or maintain this equipment. Do NOT attempt to install or operate this equip-
ment until you have read and fully understand these instructions. If you do not fully
understand these instructions, contact your supplier for further information. Be sure
to read the Safety Precautions before installing or operating this equipment.
BE SURE THIS INFORMATION REACHES THE OPERATOR.
YOU CAN GET EXTRA COPIES THROUGH YOUR SUPPLIER.
USER RESPONSIBILITY
This equipment will perform in conformity with the description thereof contained in this manual
and accompanying labels and/or inserts when installed, operated, maintained and repaired in
accordance with the instructions provided. This equipment must be checked periodically. Mal-
functioning or poorly maintained equipment should not be used. Parts that are broken, missing,
worn, distorted or contaminated should be replaced immediately. Should such repair or replace-
ment become necessary, the manufacturer recommends that a telephone or written request for
service advice be made to the Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of
the manufacturer. The user of this equipment shall have the sole responsibility for any malfunc-
tion which results from improper use, faulty maintenance, damage, improper repair or alteration
by anyone other than the manufacturer or a service facility designated by the manufacturer.