ESAB Cutmaster 100 SL100 1Torch, Руководство по эксплуатации

Страница: 3 / 122

!
WARNING
Read and understand this entire Manual and your employer’s safety practices
before installing, operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's
best judgment, the Manufacturer assumes no liability for its use.
Plasma Cutting Power Supply
ESAB Cutmaster
®
120
SL100 1Torch™
Operating Manual Number 300X5398
Published by:
OZAS-ESAB Ltd.
ul. A. Struga 10,
45-073 Opole, Poland
Phone: +48 (0) 77 4019270
www.esab.com
Copyright 2015, 2019 by ESAB
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the pub-
lisher is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any
loss or damage caused by any error or omission in this Manual, whether such error
results from negligence, accident, or any other cause.
For Printing Material Specification refer to document 47x1909
Original Publication Date: January 15, 2015
Revision Date: October 31, 2019
Record the following information for Warranty purposes:
Where Purchased:_______________________________ ________________
Purchase Date:__________________________________ ________________
Power Supply Serial #:___________________________ ________________
Torch Serial #:___________________________________ ________________
i